22 Years in TechFree and Easy ReturnsOrder up to midnight and receive DPD next day delivery with a 60 minute time slot on selected products. Find out more.Read  our ReviewsPayPal Credit 0% Offers

D-Link Smart+ DGS-1210-20 20-Port Gigabit Smart Managed Switch with 4 SFP Ports


 DGS-1210-20, D-Link Smart+ DGS-1210-20 20-Port Gigabit Smart Managed Switch with 4 SFP Ports

Key Features

  • 16x Gigabit Ethernet ports/4x 1000BASE-T SFP ports
  • Up to 40Gbps switching capacity
  • High reliability with Loopback Detection and cable diagnostics
  • Simple Web based management
  • Limited Lifetime Warranty
  • DGS-1210-20

Part No: DGS-1210-20

Stock Code: 6216717


£105.49 Inc VAT

WAS £117.49 SAVE £12.00

Add To Basket

3 In Stock for Delivery


0% for 4 Months with PayPal Credit

Click for more information ►


FREE Delivery, or
From tomorrow if ordered by 5pm

Click to view delivery information ►


Order online now then collect from Box

(3 available tomorrow)


Collect from over 2,500 shops in the UK.







D-Link Smart+ DGS-1210-20 20-Port Gigabit Smart Managed Switch with 4 SFP Ports



  • Easy Management - A multilingual Web UI, a compact CLI, and a variety of management features allow the switches to integrate with your existing network
  • IPv6 Ready - IPv6 compliance means that the switches are ready to meet future addressing standards, and are compatible with both your IPv4 and IPv6 network.

The D-Link DSG-1210 Series Smart Managed Switches are the latest generation of switches to provide a range of physical interface types, multiple management interfaces, and advanced Layer 2 features. With all of these features combines, the DGS-1210 Series provides a const-efficient and flexible solution for expanding any business network.


  • Green Technology - Link status detection, Port shut-off, System hibernation
  • Security Features - Access Control Lists (ACLs), D-Link Safeguard Engine protects the CPU from broadcast/multicast/unicast flooding, Port Security supports up to 64 MAC addresses per port, ARP Spoofing Prevention, Smart Binding
  • Intuitive Management - D-Link Network Assistant (DNA) utility or multilingual Web UI, Built-in SNMP MIB for remote NMS (D-View 7.0), Compacct Command Line Interface (CLI) through Telnet
  • Advanced Features - Static route, Surveillance Mode, Auto Voice VLAN, Dual software images, Dual configuration files

Seamless Integration

The DGS-1210 Series includes a wide range of port and media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps combo ports, and 100/1000 Mbps SFP ports. The DGS-1210-10, DGS-1210-26, DGS-1210-10P, and DGS-1210-10MP models feature 2 100/1000 Mbps SFP ports, while all other DGS-1210 Series models feature 4 100/1000 Mbps combo ports, allowing you to choose the most suitable media type for your requirements.

Advanced Features

The DGS-1210 Series comes equipped with a complete lineup of L2 features, including IGMP snooping, port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers. The DGS-1210 Series also supports advanced features such as static routes, which allow network administrators to divide the network into VLANs, increasing network efficiency. Network maintenance features include loopback detection and cable diagnostics. Loopback detection significantly speeds up troubleshooting by automatically detecting and shutting down switching loops. The cable diagnostics feature, designed primarily for administrators and customer service representatives, determines the cable quality and quickly discovers errors, allowing for hassle-free diagnostics and maintenance.

Automatic Configuration

The DGS-1210 Series supports Auto Voice VLAN and Surveillance Mode, which allow voice and video traffic to be automatically identified and handled differently to regular network traffic. Auto Voice VLAN detects Voice over IP (VoIP) traffic and automatically segments it from the rest of the network, increasing security and allowing Quality of Service (QoS) to be applied. Surveillance Mode detects compatible ONVIF cameras and places them in a surveillance VLAN, allowing a single switch to be used for voice, video, and data, removing the need for dedicated hardware and reducing maintenance costs. Surveillance Mode also includes its own Web UI, making surveillance features easily accessible and simplifying management of your surveillance network.

Secure Your Network

D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by malicious attacks. The DGS-1210 Series supports 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. The Access Control List (ACL) feature enhances network security and helps to protect the internal IT network. The DGS-1210 Series also features Address Resolution Protocol (ARP) spoofing prevention, which provides protection from attacks on the network that could allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages. To prevent ARP spoofing attacks, the switch uses packet control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP server screening feature filters DHCP replies on unauthorised ports to prevent them from being assigned an IP address.

Versatile Management

The DGS-1210 Series comes with the D-Link Network Assistant (DNA) utility that enables administrators to control their network down to the port level. The D-Link Network Assistant utility furthermore allows customers to easily discover multiple D-Link Smart Managed Switches within the same L2 network segment and display them on-screen for instant access. With this utility, users do not need to change the IP address of their PC. This allows for simultaneous configuration and basic setup of all discovered devices, including password changes and firmware upgrades. The DGS-1210 Series also supports D-View 7.0 and Command Line Interface (CLI) through Telnet. D-View 7.0 is a network management system that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security.


From the Manufacturer



No. Ports 16
Predominant Port Type 10/100/1000 Gigabit Fast Ethernet
PoE Ports N/A
Switch Management Smart Managed
Product Type Ethernet Switch
Network Technology 10/100/1000Base-T
Brand Name D-Link

Total Number of Network Ports20
I/O Expansions
Number of Total Expansion Slots4
General Information
ManufacturerD-Link Systems, Inc
Management & Protocols
General Information
Manufacturer Part NumberDGS-1210-20
I/O Expansions
Shared SFP SlotYes
Network & Communication
Layer Supported2
General Information
Manufacturer Website Addresshttp://www.dlink.co.uk
I/O Expansions
Number of SFP Slots4
Uplink PortNo
General Information
Brand NameD-Link
Media & Performance
Ethernet TechnologyGigabit Ethernet
General Information
Product SeriesDGS-1210
Power Description
Power SourcePower Supply
General Information
Product ModelDGS-1210-20
Marketing InformationThe D-Link DGS-1210 Series is the latest generation of Web Smart switches to feature D-Link Green technology. Equipped with 10, 16, 24, or 48 10/100/1000Mbps ports and two or four combo 10/100/1000BASE-T/SFP ports, the series integrates advanced management and security functions that provide performance and scalability. Additionally, the 10/100/1000Mbps ports on the DGS-1210-10P are PoE enabled, offering ease-of-use and green features such as PoE scheduling, which allows for the power to be shut off at a pre-determined time. Management options for the DGS-1210 Series switches include SNMP, Web Management, SmartConsole Utility, and Compact Command Lines. The series also supports ACL filtering and the D-Link Safeguard Engine(tm). The DGS-1210 Series uses Auto Voice VLAN, ensuring higher priority for voice traffic. The DGS-1210-10P comes with a fanless design in a compact 13-inch desktop enclosure; the DGS-1210-16 and DGS-1210-24 come in a fanless design with a 19-inch metal case. The DGS-1210-48 is equipped with two smart fans; these fans are set to low speed by default and will automatically switch to high speed once the temperature threshold has been reached. A fanless design allows for quieter operation and guarantees an extended lifetime, while smart fans help to considerably save power.
Product NameDGS-1210-20 Ethernet Switch
Power Description
Redundant Power Supply SupportedNo
General Information
Product TypeEthernet Switch
Stack PortNo
Port/Expansion Slot Details20 x Gigabit Ethernet Network / 4 x Gigabit Ethernet Expansion Slot
Media & Performance
Media Type SupportedTwisted Pair / Optical Fiber
Network Technology10/100/1000Base-T / 1000Base-X
Package Contents - DGS-1210-20 Ethernet Switch - 1 x AC Power Cord - 4 x Rubber Feet - Screws - 2 x Mounting Brackets - 1 x Multi-Lingual Getting Started Guide - 1 x CD with User Manual, SmartConsole Utility program, and D-View Module
Physical Characteristics
Form FactorDesktop / Rack-mountable
Power Description
PoE (RJ-45) PortNo

Please note: Pictures are for illustration only. Please contact us if you wish to confirm the specification before ordering.


Product Reviews



D-Link - DGS-1210-20
D-Link Smart+ DGS-1210-20 20-Port Gigabit Smart Managed Switch with 4 SFP Ports


£105.49 Inc VAT

WAS £117.49 SAVE £12.00

Add To Basket
Facebook Twitter Instagram Youtube LinkedIn Phone