Price Match Promise24 Years in TechFree and Easy ReturnsOrder up to midnight and receive DPD next day delivery with a 60 minute time slot on selected products. Find out more.Read our ReviewsPayPal Credit 0% OffersPay in 3 Interest Free Instalments with Klarna

Filter (13 Products)

Clear

Router Jigs

13

1 Page

Grid
List
Sort By:
Box Recommends >

Trend HINGE/JIG Single Piece Contractor Hinge Jig

HINGE/JIG

£161.99

0% for 4 Months with PayPal Credit

(2)
  • Suitable for timber based doors & square butt hinges
  • Four apertures for fire door requirements
  • For use on inside & outside doors or rebated frames with maximum 25mm thick fixed stops
  • Angled position slots to prevent creep
  • Long reach router cutter required 12mm diameter with 70mm overall length
  • HINGE/JIG
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)

Trend H/JIG/A 2 Piece Contractor Hinge Jig

H/JIG/A

£173.99

0% for 4 Months with PayPal Credit

  • Suitable for timber based doors & square butt hinges
  • Four apertures for fire door requirements
  • For use on inside & outside doors or rebated frames with maximum 25mm thick fixed stops
  • Angled position slots to prevent creep
  • Long reach router cutter required 12mm diameter with 70mm overall length
  • H/JIG/A
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)

Trend PH/JIG/AK Pro Pocket Hole Jig kit

PH/JIG/AK

£119.99

Was £143.99 Save £24

0% for 4 Months with PayPal Credit

  • Multiple Applications: Multi-function design for twin hole or single hole pockets
  • Fast Set-Up: Makes strong secure joints in seconds
  • Strong Joints: Works with all timber thicknesses from 12mm to 38mm
  • Easy To Use: For new work repair work and different thickness materials
  • PH/JIG/AK
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)

Trend KWJ900 Worktop Jig 400mm - 900mm

KWJ900

£119.99

Was £131.99 Save £12

0% for 4 Months with PayPal Credit

(2)
  • Fixed lengths: 400mm | 500mm | 550mm | 600mm | 616mm | 635mm | 650mm | 700mm | 900mm
  • Cuts up to 40mm thick worktops with or without anti-drip postformed edge
  • Left/Right hand corners / 400mm peninsular joint / 45° end cut / 45° trade corner solution
  • 100mm radius corner / 40mm radius corner / 35mm kitchen door hole / 3/4inch BSP hole for mixer taps
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)
(3)
  • Fixed lengths: 250mm | 300mm | 400mm | 500mm | 550mm | 600mm | 616mm | 635mm | 650mm | 700mm
  • Cuts up to 40mm thick worktops with or without anti-drip postformed edge
  • Lef/Right hand corners / 400mm peninsular joint / 45° end cut / 45° trade corner solution
  • 100mm radius corner / 40mm radius corner / 35mm kitchen door hole / 3/4inch BSP hole for mixer taps
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)
(17)
  • Solid hardened bushes with variable pitch of 29mm to 63mm
  • Use on timber MDF plywood and blockboard
  • Allows a variety of joints to be created individually
  • Square drive self tapping screws for use with a No.2 square drive bit
  • Workpiece can be handled immediately after gluing & screwing creating time saving benefits
  • PH/JIG
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)

Trend LOCK/JIG Lock Jig

LOCK/JIG

£83.99

Was £89.99 Save £6

3 payments of £27.99 with Klarna

(2)
  • For most common sash mortises & dead locks
  • Deeper mortises can be achieved with a suitable size of auger bit
  • Fast clean & accurate results on doors 34mm to 58mm thick even in hardwood
  • Steel plates & body
  • LOCK/JIG
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)
  • Multiple Applications: Multi-function design for twin hole or single hole pockets
  • Fast Set-Up: Makes strong secure joint in seconds
  • Strong Joint: Works with all thicknesses from 12mm (¹⁵/₃₂") to 38mm (1 ¹/₂")
  • Easy to Use: For new work repair work and different thickness materials
  • Supplied with drill driver bit and a selection of screws
  • PH/JIG/BK
£2.95 Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)

Trend RS/JIG Router Surfacing Jig

RS/JIG

£119.99

0% for 4 Months with PayPal Credit

  • Ideal for wider materials - Surface & flattens stock up to 400mm wide
  • End grain routing
  • Depth of cut can be easily controlled with the router plunge
  • Cradle can be locked to the bars fro single axis movement
  • High pressure laminate running rails & router cradle for wearfree performance
  • Twin stainless steel rails support heavier routers up to 7kg weight
  • RS/JIG
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)

Trend KWJ750P Pro Worktop Jig 150mm - 750mm

KWJ750P

£119.99

0% for 4 Months with PayPal Credit

  • 5 backset options (3mm / 5mm / 10mm / 25mm / 35mm)
  • Flush edge compatability allows worktops to be cut flush with door faces for handless styles
  • Worktop compatabilty: Compact laminate Composite Solid Wood Chipboard Laminate
  • Unique backset wedges for consistent easy setting
  • Covers square edge small radius Postform radius and bullnose profiles
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)
  • Adaptable sliding plate and stop adjustments
  • Engraved underside for fast accurate set up
  • For use with 1/2" routers with 80mm plunge 30mm guidebush and 12mm cutter
  • Ideal for obscure sized locks as well as standard locks and latches
  • Suitable trend cutters: 3/75X1/2TC TR37X1/2TC C172X1/2TC
  • LOCK/JIG/B
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)

Trend H/JIG/C 2 Piece Skeleton Hinge Jig

H/JIG/C

£173.99

0% for 4 Months with PayPal Credit

  • Ideal for old frames
  • Suitable for timber based doors & square butt hinges
  • Fully adjustable apertures for fire doors & renovation work
  • For use on inside & outside doors or rebated frames with maximum 25mm thick fixed stops
  • Adjustable edge guides with presets for hinges
  • Long reach router cutter required 12mm diameter with 70mm overall length
  • H/JIG/C
FREE Delivery, or
From tomorrow if ordered by 5pm
Compare (Up To 4 Products)

Trend KWJ900P Pro Worktop Jig 150mm - 900mm

KWJ900P

£179.99

0% for 4 Months with PayPal Credit

  • Adaptable - Can be built to different sizes as required
  • Flush edge compatability allows worktops to be cut flush with door faces for handless styles
  • Worktop compatabilty: Compact laminate Composite Solid Wood Chipboard Laminate
  • Unique backset wedges for consistent easy setting
  • Covers square edge small radius Postform radius and bullnose profiles
Compare (Up To 4 Products)

1 Page

View our Refurbished Store
View our Refurbished Store
Facebook Twitter Instagram Youtube LinkedIn Phone